New technical catalogues and updates
NC 65 STH HES SLIM - UPDATED TECHNICAL CATALOGUE
New tables in the INFORMATION group regarding the Sash dimensioning and Gluing indications for glass nelle varie configurazioni.
Inserted the Performance test table with the values for the Tightness tests and the Heat transmission tests .
Inserted a new table in the GLAZING group (EV) including the glass-glazing beads-gaskets charts with the use of the double-sided adhesive tape MG323N on the external sash rabbet.
Inserted indication regarding the correct fixing on the floor of the low sill profile NC15618.
The updated catalogue is available on the METRA Web area and on METRA Doc.
Technical sheets 001 and 002: New oversized Irone Line(IL) Sash NC15889 - profile available on stock from week 31/2018
Technical sheet 003: new 200 mm Jamb/Transom NC15562 - profile available on stock from week 28/2018
Technical sheet 004: regarding the correct fixing on the floor of the low sill profile NC15618 – profile available on stock .
Technical sheet 001: new Basic Line (BL) Sash NC17606 - profile available on stock .
Technical sheet 002: regarding the correct fixing on the floor of the low sill profile NC17618 - profile available on stock .
For the new series two new accessories have been introduced:
MA3830 – Glass support for for Sash NC17648
MU2871 – Kit spacers and punches for sashes The catalogue is available in Italian on METRA Web and on METRA Doc and will be available in English soon.
The new series will be available on stock (profiles and accessories) from week 26/2018.
Technical sheet 072: new charts about the maximum bearing load for transoms with U-bolts or rails fixed by screws MA5916.
Technical sheets from 073 to 076: new charts about the fixed glazing for glass thickness from 48 mm to 70 mm .
Technical sheets from 077 to 083: new water drainage cap MA6776 to be used for glass thickness from 45 mm to 70mm (accessory available on stock).
Technical sheet 084: about the maximum bearing load of the transoms using the additional supports for glass thickness from 55 mm to 62 mm or thickness from 62 mm to 67 mm .
Technical sheets from 085 to 112: modification of transoms for the use of the U-bolt with button MA6772 (accessory available on stock).
Technical sheet 113: regarding the modification to be carried out on the punching machine MU3022 for the machining of the modified transoms.
The technical sheet 010 refers to the new charts about the maximum bearing load for transoms with U-bolts or rails fixed by screws MA5916.
The technical sheets from 011 to 014 refer about the fixed glazing for glass thickness from 48 mm to 70 mm .
The technical sheets from 015 a 021 regard the new water drainage cap MA6775 to be used for glass thickness from 45 mm to 70 mm (accessory available on stock) .
The technical sheets from 022 to 42 refer to modification of transoms for the use of the U-bolt with button MA6772 (accessory available on stock).
The technical sheet 043 refers to the modification to be carried on the punching machine MU3036 for the machining of the modified transoms..
Technical sheet 308: replacement of the external U-bolts for the transom fixing for the HES casement systems .
The new U-bolt are fixed by means of grub screws, the former ones had to be fit by snapping-in.
The new U-bolts are available on stock
The old U-bolts MA2840 – MA2842 – MA2844 will be available as long as stocks last..
The estimation and calculation software is currently being updated
